1. J.W. Song, J.W. Han, M.S. Kim and S. K. Hwang : Fabrication of Magnesium Alloy(AZ31) Sheet by Extrusion, Materials Science Forum, Vol. 449. pp. 65-68 2004

2. S.Y. Lee, Y.B. Chun, J.W. Han, S.K. Hwang : Effect of Thermomechanical processing on grain boundary characteristics in two-phase, Materials Science and Engineering A363 (2003) 307-315

3. 김상욱, 김도현, 유병돈, 한정환, 김목순 : Evaporation Behavior of Magnesium under Reduced Pressure, Materials Science Forum, Vol.

4. 한정환, 김동진, 유병돈, 변지영, 심재동 : Effect of Gas Bubbling nd Impeller Agitation on Degassing Kinetics during Magnesium Alloy(AZ91D) Melt Recycling-Water Model Approach, Materials Scienc Forum, Vol.

5. 송재완, 김창원, 한정환, 김목순, 황선근 : Improvement in Mechanical Properties of Magnesium Alloy(AZ31) Sheet Fabricated by Casting and Subsequent Plastic Working, Materials Science Forum, Vol.

6. 한정환, 권의혁, 한신석, 지재홍, 김병수, 이재천 : Effect of Viscosity on the Separation of Copper from Al₂O₃-CaO-SiO₂-10wt%MgO, Materials Science Forum, Vol.

7. 박재성, 김원용, 김목순, 유병돈, 한정환, Kazuhisa Shibue : Nano-scaled Microstructure and Tensile Behavior of Spray Formed and Subsequently Worked Al-8Fe-2Mo-2V-1Zr Alloy, Materials Science Forum, Vol

8. 이상호, 김목순, 정동수, 한정환, 유병돈 : Fabrication and Sagging Behavior of Three Layer Al-Si/Al-Mn-Zn/Al-Si Clad Sheets for Automotive Heat Exchanger, Materials Science Forum, Vol

9. Dong Heon Kam, Hwang Ku Lee, Jeong Whan Han, and Byung Don You : Fluid Flow Analysis in Horizontal Continuous Casting Tundish,METALS AND MATERIALS International, Vol. 8, No. 6 (2002), pp. 535-541, 2001. 07 ～ 2002. 06, 인하대 교내연구비

10. (S,1.069) Jeong Whan Han, Hwang Gu Lee and Jae Yong Park : Numerical simulation of Dynamic Wetting Behavior in the Wetting Balance Method, Materials Transactions JIM, Vol. 43, No. 8 (2002) pp. 1816-1820, 2001. 09 ～ 2002. 08, 산업자원부

11. (S,0.578) Jeong Whan HAN, Seung Hwan HEO, Dong Heun KAM, Byung Don YOU, Jong Jin PaK and Hyo Suk Song : Transient Fluid Flow Phenomena in a Gas Stirred Liquid Bath with Top Oil Layer - Approach by Numerical Simylation and Water Model Experiments, ISIJ International, Vol. 41, No 10 (2001) pp. 1165-1173, 2000. 11 ～ 2001. 12, POSCO 위탁과제

12. (S,0.285) Byung-Don You, Jeong-Whan Han and Jong-Jin Pak : Decarburization of High Carbon Ferromanganese Melt, Steel Research, (2000) Vol. 71, No. 1+2 pp. 22-26

13. Seung-Hwan Heo, Ik-Bum Kim, Jeong-Whan Han, Woon-Suk Hwang, Byung-don You and Mok-Soon Kim : Comparisons of High Temperature Oxidation Behavior between Reactive-Sintered and Melted Ti-45at.%Al-1.6at%Mn Intermetallics, Metals and Materials. Vol 6, No. 5 (2000) pp. 449-453

14. Young-Jin Kim, Ik-Beom KIM, Mok-Soon Kim, Byung-Don You, Jeong-Whan Han and Woon-Suk Hwang : Role of Chlorine in the OxidationResistance of Ti-45at.%Al-1.6at.%Mn Intermetallic Compound, submitted to Metals and Materials, SCI expanded, Vol 6, No. 5 (2000) pp. 455-459

15. D.J. Min, J.W. Han and W.S. Chung : A Study of the Reduction Rate of FeO in Slag by Solid Carbon, Metallurgical and Materials Transactions B, Vol. 30B, Apr., (1999) pp. 215-221 SCI

16. Byung-Don You, Kab-Yong Park, Jong-Jin Pak and Jeong-Whan Han : Oxygen Refining of Molten High-Carbon Ferromanganese, Metals and Materials, Vol.5, No.4, (1999) pp. 395-399 SCI

17. J. W. Han and U-sok Yoon : A Numerical Simulation for Mini-mill Tundish Design - Effects of FC pad on Tundish Flow Characteristics. Metals and Materials, Vol.4, No.2 (1998), pp. 173-182 SCI

18. J.K. Chung, J.W. Han and J.H. Lee : Coke Properties at Tuyere Level in Blast Furnace with Pulverized Coal Injection, Metals and Materials, Vol. 2, No. 1, (1996), pp. 1

19. Y.S. Hwang, K.H. Moon, J.W. Han and J.K. Yoon : Numerical Simulation on the Effect of EMBR on the Fluid Flow in the Curved Continuous Caster, J. of the Korean Inst. of Met. & Mater., Vol.33, No.11, (1995), pp. 1414

20. Hyung Sun Kim and Jeong Whan Han : Chromate Refractory by Combustion Process, Journal of the Korean Ceramic Society, Vol. 31, No. 12 (1994), pp. 1437

21. S. Joo, J.W. Han and R.I.L. Guthrie : Inclusion Behavior and Heat-Transfer Phenomena in Steelmaking Tundish Operations : Part III. Applications - Computational Approach to Tundish Design,Metallurgical Transaction B, Volume 24B, October (1993), pp. 779